Speed Bumps & HUMPS
SA-SO's parking-lot car stops, speed bumps and speed humps are made from 100% recycled rubber, allowing them to easily conform to the road. Each one is baked in a mold with embedded highly-reflective tape resulting in longer product life. Consider SA-SO when choosing traffic calming devices for your location!
Standard Speed Bumps
- For traffic speeds 10 MPH or less
- For use in moderate traffic areas
- Channeled bottom for cables protection
- Add End Caps to protect your investment
| Description | Part No. |
|---|---|
| 4’ Speed Bump - 4’(L) x 12"(W) x 2.6"(H) | SB48-SE |
| 6’ Speed Bump - 6’(L) x 12"(W) x 2.6"(H) | SB72-SE |
| Rubber End Cap - 12"(L) x 12"(W) x 2.6"(H) | SBEC |
| Asphalt Installation Hardware | 91400G |
| Concrete Installation Hardware | 91500, 91501, or 91502 |
| 2 Gallon Epoxy Kit | 44163 |
Safety Rider® Speed Humps
- Slows vehicles while maintaining traffic flow
- Great for entertainment venues
- Tongue and groove system
- Add End Caps to protect your investment
| Description | Part No. |
|---|---|
| 19.5" Speed Hump Center Section | 23500V |
| 19.5" Speed Hump End Cap - Female | 23501V |
| 19.5" Speed Hump End Cap - Male | 23502V |
